| Cable cutter HS3 6 D CU | |
 |
|
| Hydraulic cable cutter with spring return | |
| Order no.: | 60-138 |
| Capacity: | Cu-Al-Kabel up to max. Ø 60 mm or 570 mm² |
| Length: 416 mm | Weight: 3,8 kg |
| In case of different cutting material, please contact the manufacturer | |
| Pressure: 56,5 kN at 450 bar | |
| Max. working pressure: 450 bar | |
| Stroke: 46 mm | |
| Required oil volume: 58 cm³ | |
| Connection: G 1/2 female thread | |
| Pressure of the jaws is relativ to the cutting power, so the jaws do not get jammed | |
| Open jaws for instant operation | |
| Tool can be combined with our hydraulic pumps | |
| Cable cutter HS3 6 RH CU | |
 |
|
| Hydraulic cable cutter with hydraulic return | |
| Order no.: | 60-140 |
| Capacity: | Cu-Al-Kabel up to max. Ø 60 mm or 570 mm² |
| Length: 380 mm | Weight: 4,5 kg |
| In case of different cutting material, please contact the manufacturer | |
| Pressure: 56,5 kN at 450 bar | |
| Max. working pressure: 450 bar | |
| Stroke: 48 mm | |
| Required oil volume: 61 cm³ | |
| Connection: P G 1/2 female thread, max. working pressure 450 bar R M16x1,5 external thread with 24° inner cone, max. working pressure 250 bar |
|
| Pressure of the jaws is relativ to the cutting power, so the jaws do not get jammed | |
| Open jaws for instant operation | |
| Tool can be combined with our hydraulic pumps | |
| Cable cutter HS4 D CU | |
 |
|
| Hydraulic cable cutter with spring return | |
| Order no.: | 60-135 |
| Capacity: | Cu-Al-Kabel up to max. Ø100 mm or 1000 mm² |
| Length: 680 mm | Weight: 11,5 kg |
| In case of different cutting material, please contact the manufacturer | |
| Pressure pump specific: HMP2 450 bar 127 kN HMP3 360 bar 102 kN |
|
| Max. working pressure: 450 bar | |
| Stroke: 82 mm | |
| Required oil volume: 350 cm³ | |
| Connection: G 1/2 female thread, | |
| Pressure of the jaws is relativ to the cutting power, so the jaws do not get jammed | |
| Open jaws for instant operation | |
| Tool can be combined with our hydraulic pumps | |
| Cable cutter HS4 RH CU | |
 |
|
| Hydraulic cable cutter with hydraulic return | |
| Order no.: | 60-137 |
| Capacity: | Cu-Al-Kabel up to max. Ø100 mm or 1000 mm² |
| Length: 590 mm | Weight: 10,5 kg |
| In case of different cutting material, please contact the manufacturer | |
| Pressure pump specific: HMP2 450 bar 127 kN HMP3 360 bar 102 kN |
|
| Max. working pressure: 450 bar | |
| Stroke: 82 mm | |
| Required oil volume: 350 cm³ | |
| Connection: P G 1/2 female thread, max. working pressure 450 bar R M16x1,5 external thread with 24° inner cone, max. working pressure 250 bar |
|
| Pressure of the jaws is relativ to the cutting power, so the jaws do not get jammed | |
| Open jaws for instant operation | |
| Tool can be combined with our hydraulic pumps | |
| Cable cutter HS5 D CU | |
 |
|
| Hydraulic cable cutter with spring return | |
| Order no.: | 60-046 |
| Capacity: | Cu-Al-Kabel up to max. Ø130 mm or 2000 mm² |
| Length: 710 mm | Weight: 29,5 kg |
| In case of different cutting material, please contact the manufacturer | |
| Pressure pump specific: HMP2 450 bar 226 kN HMP3 360 bar 181 kN |
|
| Max. working pressure: 450 bar | |
| Stroke: 100 mm | |
| Required oil volume: 530 cm³ | |
| Connection: G 1/2 female thread, | |
| Pressure of the jaws is relativ to the cutting power, so the jaws do not get jammed | |
| Open jaws for instant operation | |
| Tool can be combined with our hydraulic pumps | |
| Cable cutter HS5 RH CU | |
 |
|
| Hydraulic cable cutter with hydraulic return | |
| Order no.: | 60-084 |
| Capacity: | Cu-Al-Kabel up to max. Ø130 mm or 2000 mm² |
| Length: 710 mm | Weight: 29 kg |
| In case of different cutting material, please contact the manufacturer | |
| Pressure pump specific: HMP2 450 bar 226 kN HMP3 360 bar 181 kN |
|
| Max. working pressure: 450 bar | |
| Stroke: 100 mm | |
| Required oil volume: 530 cm³ | |
| Connection: P G 1/2 female thread, max. working pressure 450 bar R M16x1,5 external thread with 24° inner cone, max. working pressure 250 bar |
|
| Pressure of the jaws is relativ to the cutting power, so the jaws do not get jammed | |
| Open jaws for instant operation | |
| Tool can be combined with our hydraulic pumps | |
| Cable cutter KB10/65 RH | |
 |
|
| Hydraulic cable cutter with hydraulic return | |
| Order no.: | 60-127 |
| Capacity: | Cu-Al-Kabel up to max. Ø 65 mm |
| Length: 430 mm | Weight: 15 kg |
| In case of different cutting material, please contact the manufacturer | |
| Pressure pump specific: HMP2 450 bar 106 kN HMP3 360 bar 86 kN |
|
| Max. working pressure: 450 bar | |
| Stroke: 75 mm | |
| Required oil volume: 250 cm³ | |
| Connection: P G 1/2 female thread, max. working pressure 450 bar R M16x1,5 external thread with 24° inner cone, max. working pressure 250 bar |
|
| The guillotine-section guarantees a very neat cut edge | |
| Tool can be combined with our hydraulic pumps | |
| Cable cutter KB20/100 RH | |
 |
|
| Hydraulic cable cutter with hydraulic return | |
| Order no.: | 60-125 |
| Capacity: | Cu-Al-Kabel up to max. Ø 100 mm |
| Length: 590 mm | Weight: 32 kg |
| In case of different cutting material, please contact the manufacturer | |
| Pressure pump specific: HMP2 450 bar 226 kN HMP3 360 bar 181 kN |
|
| Max. working pressure: 450 bar | |
| Stroke: 105 mm | |
| Required oil volume: 650 cm³ | |
| Connection: P G 1/2 female thread, max. working pressure 450 bar R M16x1,5 external thread with 24° inner cone, max. working pressure 250 bar |
|
| The guillotine-section guarantees a very neat cut edge | |
| Tool can be combined with our hydraulic pumps | |
| Cable cutter KB30/160 RH | |
 |
|
| Hydraulic cable cutter with hydraulic return | |
| Order no.: | 60-020 |
| Capacity: | Cu-Al-Kabel up to max. Ø 160 mm |
| Length: 870 mm | Weight: 63 kg |
| In case of different cutting material, please contact the manufacturer | |
| Pressure: 282 kN at 360 bar | |
| Max. working pressure: 360 bar | |
| Stroke: 197 mm | |
| Required oil volume: 1600 cm³ | |
| Connection: P G 1/2 female thread, max. working pressure 360 bar R M16x1,5 external thread with 24° inner cone, max. working pressure 250 bar |
|
| The guillotine-section guarantees a very neat cut edge | |
| Tool can be combined with our hydraulic pumps | |
| Cable cutter KB30/200 RH | |
|
|
| Hydraulic cable cutter with hydraulic return | |
| Order no.: | 60-146 |
| Capacity: | Cu-Al-Kabel up to max. Ø 200 mm |
| Length: 1017 mm | Weight: 94 kg |
| In case of different cutting material, please contact the manufacturer | |
| Pressure: 282 kN at 360 bar | |
| Max. working pressure: 360 bar | |
| Stroke: 220 mm | |
| Required oil volume: 1800 cm³ | |
| Connection: P G 1/2 female thread, max. working pressure 360 bar R M16x1,5 external thread with 24° inner cone, max. working pressure 250 bar |
|
| The guillotine-section guarantees a very neat cut edge | |
| Tool can be combined with our hydraulic pumps | |